WORKING CONDITION Max. medium temperature:+40℃ Max.ambient temperature:+40℃ Max.working pressure:5 bar Medium free from granules or anything that may damage the pump. Power voltage: single-phase AC 220V, Frequency:50 Hz, 60Hz and three phases AC380V, frequency 50Hz.10 percent more or less voltage fluctuation from the rated value is allowed. APPLICATION Pump body: Cas Aluminum or Cast lron Mechanical Seal: Ceramic-Graphite,Silicon Stator sheet:DR510 or 470 Motor bracket: Cast Aluminum or Cast Iron Carbide-Carbide Alloy Motor shaft: CS 45# or SS420 lmpeller: Cast Aluminium APPLICATION Well pumping, river pumping, farming irrigation, water supply and drainage in breeding industry and domestic use, etc. BRIEF INTRODUCTION Models QDX(QX) submersible pumps consist of water pump, mechanical seal and single-phase or three-phase asynchronous motor with single-phase for QDX and three-phase for Model QX, using centrifugal impeller, small in volume and light in weight. FEATURE Low energy consumption, high efficiency, low noise and stable operation. Close structure with built-in Thermal Protector for single-phase motor Protection class:IPX8 Insulation Class: E

                                     

QJD\QJ

Model Power Volt (V) Freq (rpm) Speed (Hz) Lift (m) Flow (m3/h) Diameter (mm) KW HP QJD1.8-30/5-0.37 0.37 0.5 220 50 2850 30 1.8 25 QJD1.8-36/6-0.5 0.5 0.65 220 50 2850 36 1.8 25 QJD1.8-42/7-0.55 0.55 0.75 220 50 2850 42 1.8 25 QJD1.8-48/8-0.75 0.75 1 220 50 2850 48 1.8 25 QJD1.8-60/10-1.1 1.1 1.5 220 50 2850 72 1.8 25 QJD1.8-72/12-1.5 1.5 2 220 50 2850 30 1.8 25 QJD5-25/5-0.75 0.75 1 220 50 2850 25 5 40 QJD5-35/7-1.1 1 1.3 220 50 2850 35 5 40 QJD5-45/9-1.5 1.1 1.5 220 50 2850 45 5 40 QJD5-55/11-1.8 1.8 2.4 220 50 2850 55 5 40 QJ1.8-120/20-2 2 2.7 380 50 2850 120 1.8 25 QJ1.8-150/25-2.2 2.2 3 380 50 2850 150 1.8 25 QJ5-60/12-1.8 1.8 2.4 380 50 2850 60 5 40 QJ5-80/16-2.2 2.2 3 380 50 2850 80 5 40

Model	Power		Volt (V)	Freq (rpm)	Speed (Hz)	Lift (m)	Flow (m3/h)	Diameter (mm)
	KW	HP
QD3-36-1.1	1.1	1.5	220	50	2850	36	3	25
QD10-26-1.1	1.1	1.5	220	50	2850	26	10	50
QD4-50-1.5	1.5	2	220	50	2850	50	4	25
QD12-45-1.5	1.5	2	220	50	2850	45	12	65
QD3-75-1.8	1.8	2.2	220	50	2850	75	3	25
QY3-36-1.1	1.1	1.5	380	50	2850	36	3	25
QY10-26-1.1	1.1	1.5	380	50	2850	26	10	50
QY4-50-1.5	1.5	2	380	50	2850	50	4	25
QY12-45-1.5	1.5	2	380	50	2850	45	12	65
QY3-75-1.8	1.8	2.2	380	50	2850	75	3	25

QY

Model Power Volt (V) Freq (rpm) Speed (Hz) Lift (m) Flow (m3/h) Diameter (mm) KW HP QY10-32-2.2 2.2 3 380 50 2850 32 10 40 QY15-26-2.2 2.2 3 380 50 2850 26 15 50 QY25-17-2.2 2.2 3 380 50 2850 17 25 65 QY40-12-2.2 2.2 3 380 50 2850 40 12 75 QY65-7-2.2 2.2 3 380 50 2850 7 65 100 QY100-4.5-2.2 2.2 3 380 50 2850 4.5 100 150 QY8.4-50-3 3 4 380 50 2850 50 8.4 40 QY12.5-40-3 3 4 380 50 2850 40 12.5 50 QY15-36-3 3 4 380 50 2850 36 15 50 QY25-26-3 3 4 380 50 2850 26 25 65 QY40-16-3 3 4 380 50 2850 16 40 75 QY65-10-3 3 4 380 50 2850 10 65 100 QY160-5-3 3 4 380 50 2850 5 160 150

VIBRATION SUBMERSIBLE PUMP

Model Power Volt(V) Freq(Hz) Speed(rpm) Lift(m) Flow(m3/h) Diameter (mm) KW HP V180 0.18 0.2 220 50 2850 7 6 25 V250 0.25 0.33 220 50 2850 8 8 25 V450 0.4 0.55 220 50 2850 10 12 50 V750 0.75 1 220 50 2850 12 18 50

FUNCTION AND FEATURE WQ series submersible sewage pump is mainly comprised of three parts: pump, mechanical seals and motor. Pump is at the lowerpart of sewage pump, and the structure is impeller and shell. Motor located at the upperpart of the motor pump, which is the singlephase or three-phase electric motor. Mechanical seals are betweenpump and motor and it is a kind of double end mechanicalseals,"o"rings are applied in all static joints of the submersible pump.The motor pumps are widely used in agriculture, architecture, mine, environment protection and industry, such as drainage slurry, wastewater, dung, which contained short fibre, wastepaper, sand, and so on. lt is also an ideal equipment for irrigation and clear slit. CONDITION OF USAGE 1.Medium temperature must not above 40℃ 2.PH range of Medium between 6.5-8.5; 3.Volume ration of solid partial content shall be within 0.1％，size of solid particle shall be not bigger than 0.2mm; 4.Power supply shall be 220V and 50Hz,voltage is allowed to fluctuate between 0.9 to 1.1 times of its rated voltage; 5.The depth of the pump under water must be less than 5 metres.

Mini Circulator Pump

JS SERIES SELF-PRIMING PUMP

JSW SERIES SELF-PRIMING PUMP

CONSTRUCTION:

Pump-Peripheral
Pump Body:Cast Iron
Front Cover:Cast Iron
Impeller:Brass / Plastic
Mechanical Seal:Carbon/Ceramic/Stainless Steel 
Motor Housing:Alloy Aluminium
Shaft:Carbon Steel
Insulation:Class B
Protection:IP44

JET

JET series priming injection pump is of a pure water pump consists of centrifugal pump and nozzle,which adopting qualifide special seals is impacted,safe,reliable and has strong capability on self-priming.It's sutable for water supplying to garden,hotel,villas and high-rising building.

MHF SERIES CENTRIFUGAL PUMP

DTM

Model Power Volt(V) Freq(Hz) Speed(rpm) Lift(m) Flow(m3/h) Suct(m) Diameter (mm) Weight (kg) Packing Dimension (cm) KW HP DTM-15 0.75 1 220 50 2850 20 15 8 40X40 13 33X20X24 DTM-20 1.1 1.5 220 50 2850 20 21 8 50X50 21 38X21X26 DTM-80 2.2 3 220 50 2850 18.5 78 8 80X80 31 40X24X31 DTM-100 2.2 3 220 50 2850 18.5 78 8 100X100 31 40X24X31

DK series of Centrifugal Pump

SCM series of Centrifugal Pump

CPM

Range of Performance Flow rate up to 130L/min (7.8m3/h) Head up to 59 m Working Condition Suction lift up to 7 m Liquid temperature up to +40oC Ambient temperature up to +40 oC Max. Working pressure: 6 bar Application and Installation They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made. They are suitable for domestic use and in particular for delivering water in combination with small pressure sets, as well as for irrigation. The pumps shall be installed in enclosed places, or at least protected against inclement weather. Structure Feature Pump body: Cast iron Motor Bracket: Aluminum Impeller: Brass Motor shaft: SS420 or CS45# Mechanical seal: Ceramic - Graphite or Ceramic - Carbide alloy Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available. Insulation: Class B Protection: IP 44

Performance Curve               Model Power Volt(V) Freq(Hz) Speed(rpm) Lift(m) Flow(m3/h) Suct(m) Diameter (mm) Weight (kg) Packing Dimension (cm) KW HP CPM-130 0.37 0.5 220 50 2850 22 5.4 8 25X25 8 30X17X21 CPM-146 0.55 0.75 220 50 2850 24 6 8 25X25 10 30.5X19X24 CPM-158 0.75 1 220 50 2850 32 6.6 8 25X25 12 31X19X24.5 CPM-170 1.1 1.5 220 50 2850 38 7.2 8 25X25 18.5 35X20.5X26 CPM-180 1.1 1.5 220 50 2850 42 8.4 8 25X25 18.5 37X26X32 CPM-200 1.5 2 220 50 2850 50 9.5 8 25X25 20 38X26X32

Model Power Volt(V) Freq(Hz) Speed(rpm) Lift(m) Flow(m3/h) Suct(m) Diameter (mm) Weight (kg) Packing Dimension (cm) KW HP DB125A 0.33 0.45 220 50 2850 30 2.4 8 25X25 5.5 28.5X13.5X18 DB125B 0.33 0.45 220 50 2850 30 2.4 8 25X25 5.5 28.5X14.5X18

CONSTRUCTION:
Pump-Peripheral
Pump Body:Cast Iron
Front Cover:Cast Iron
Impeller:Brass
Mechanical Seal:Carbon/Ceramic/Stainless Steel
Motor Housing:Alloy Aluminium
Shaft:Carbon Steel
Insulation:Class B
Protection:IP44

Range of Performance Flow rate up to 45L/min (2.7m3/h) Head up to 60 m Working Condition Submersion depth 8m Liquid temperature up to +40oC Ambient temperature up to +40 oC Max. Working pressure: 6 bar Application and Installation They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made. They are suitable for domestic use and in particular for delivering water in combination with small pressure sets, as well as for irrigation. The pumps shall be installed in enclosed places, or at least protected against inclement weather. Structure Feature Pump body: Cast iron Motor Bracket: Cast iron / Aluminum Impeller: Plactic / Brass Motor shaft: SS420 or Cs45# Mechanical seal: Ceramic - Graphite Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available. Insulation: Class B Protection: IP 44

Ferformance Curve Model Power Volt(V) Freq(Hz) Speed(rpm) Lift(m) Flow(m3/h) Suct(m) Diameter (mm) Weight (kg) Packing Dimension (cm) KW HP QB-60 0.37 0.5 220 50 2850 35 2.1 8 25X25 5 24.5X12X15.5 QB-60-1 0.37 0.5 220 50 2850 35 2.1 8 25X25 5 24.5X12X15.5 QB-70 0.55 0.75 220 50 2850 45 2.1 8 25X25 9 28.5X13.5X18 QB-80 0.75 1 220 50 2850 60 3.3 8 40X40 10 28.5X13.5X18

Property and Featurs: 　　Serie three-phase asynchronous motor is designed for Europe market, The terminal box is located on the top of motor, the motor structure is compact and the appearance is attractive, the signs and nominal value are all in conformity with IEC standards the motor have some good feature, such as high effecient, energy-saving, high starting torque and easy maintenance etc.

In sulation class:F 　　Protection type:IP54 or IP55 　　Voltage:380V or 415V 　　Frequency:50Hz or 60Hz 　　Cooling type:IC411 Technical Data of Y2 series： Type Rated Output Full Load Locked-rotor current Locked-rotor torque Pull-out torque Kw Speed (r/min) Current (A) Eff (%) Power factor (cos) Rated current Ist/IN Rated torque Tst/TN Rated torque TM/TN Synchronous Speed 3000r/min Y2-631-2 0.18 2720 0.53 65 0.80 5.5 2.2 2.2 Y2-632-2 0.25 0.69 68 0.81 Y2-711-2 0.37 2740 0.99 70 0.81 6.1 Y2-712-2 0.55 1.40 73 0.82 2.3 Y2-801-2 0.75 2830 1.83 75 0.83 Y2-802-2 1.1 2.58 77 0.84 7.0 Y2-90S-2 1.5 2840 3.43 79 Y2-90L-2 2.2 4.85 81 0.85 Y2-100L-2 3.0 2870 6.31 83 0.87 7.5 Y2-112M-2 4.0 2890 8.10 85 0.88 Y2-132S1-2 5.5 2900 11.0 86 Y2-132S2-2 7.5 14.9 87 Y2-160M1-2 11 2930 21.3 88 0.89 Y2-160M2-2 15 28.8 89 Y2-160L-2 18.5 34.7 90 0.90 Y2-180M-2 22 2940 41.0 90 2.0 Y2-200L1-2 30 2950 55.5 91.2 Y2-200L2-2 37 67.9 92 Y2-225M-2 45 2970 82.3 92.3 Y2-250M-2 55 101 92.5 Y2-280S-2 75 134 93 Y2-280M-2 90 160 93.8 0.91 Y2-315S-2 110 2980 195 94 7.1 1.8 2.2 Y2-315M-2 132 233 94.5 Y2-315L1-2 160 279 94.6 0.92 Y2-315L2-2 200 348 94.8 Y2-355M-2 250 433 95.3 1.6 Y2-355L-2 315 544 95.6 Type Rated Output Full Load Locked-rotor current Locked-rotor torque Pull-out torque Kw Speed (r/min) Current (A) Eff (%) Power factor (cos) Rated current Ist/IN Rated torque Tst/TN Rated torque TM/TN Synchronous Speed 1500r/min Y2-631-4 0.12 1310 0.44 57 0.72 4.4 2.1 2.2 Y2-632-4 0.18 0.62 60 0.73 Y2-711-4 0.25 1330 0.79 65 0.75 5.2 Y2-712-4 0.37 1.12 67 0.75 Y2-801-4 0.55 1390 1.57 71 0.75 2.4 2.3 Y2-802-4 0.75 2.03 73 0.76 6.0 2.3 Y2-90S-4 1.1 1400 2.89 75 0.77 Y2-90L-4 1.5 3.70 78 0.79 Y2-100L1-4 2.2 1430 5.16 80 0.81 7.0 Y2-100L2-4 3.0 6.78 82 0.82 Y2-112M-4 4.0 1440 8.80 84 Y2-132S-4 5.5 11.7 85 0.83 Y2-132M-4 7.5 15.6 87 0.84 Y2-160M-4 11 1460 22.3 88 2.2 Y2-160L-4 15 30.1 89 0.85 7.5 Y2-180M-4 18.5 1470 36.5 90.5 0.86 Y2-180L-4 22 43.2 91 Y2-200L-4 30 57.6 92 7.2 Y2-225S-4 37 1480 69.9 92.5 0.87 Y2-225M-4 45 84.7 92.8 Y2-250M-4 55 103 93 Y2-280S-4 75 140 93.8 Y2-280M-4 90 1490 167 84.2 Y2-315S-4 110 201 94.5 0.88 6.9 2.1 2.2 Y2-315M-4 132 240 94.8 Y2-315L1-4 160 287 94.9 0.89 Y2-315L2-4 200 359 95 Y2-355M-4 250 1485 443 95.3 0.90 Y2-355L-4 315 556 95.6 Type Rated Output Full Load Locked-rotor current Locked-rotor torque Pull-out torque Kw Speed (r/min) Current (A) Eff (%) Power factor (cos) Rated current Ist/IN Rated torque Tst/TN Rated torque TM/TN Synchronous Speed 1000r/min Y2-711-6 0.18 850 0.74 56 0.66 4.0 1.9 2.0 Y2-712-6 0.25 0.95 59 0.68 Y2-801-6 0.37 890 1.30 62 0.70 4.7 Y2-802-6 0.55 1.79 65 0.72 2.1 Y2-90S-6 0.75 910 2.29 69 5.5 2.0 Y2-90L-6 1.1 3.18 72 0.73 Y2-100L-6 1.5 940 3.94 76 0.75 Y2-112M-6 2.2 5.60 79 0.76 6.5 Y2-132S-6 3.0 960 7.40 81 2.1 Y2-132M1-6 4.0 9.80 82 Y2-132M2-6 5.5 12.9 84 0.77 Y2-160M-6 7.5 970 17.0 86 0.78 2.0 Y2-160L-6 11 24.2 87.5 0.81 7.0 Y2-180L-6 15 31.6 89 Y2-200L1-6 18.5 38.6 90 0.83 2.1 Y2-200L2-6 22 44.7 90 0.84 Y2-225M-6 30 980 59.3 91.5 0.86 2.0 Y2-250M-6 37 71.0 92 2.1 Y2-280S-6 45 86.0 92.5 2.0 Y2-280M-6 55 105 92.8 Y2-315S-6 75 990 141 93.5 2.0 Y2-615M-6 90 169 93.8 Y2-315L1-6 110 206 94 6.7 Y2-315L2-6 132 244 94.2 0.87 Y2-355M1-6 160 292 94.5 0.88 1.9 Y2-355M2-6 200 365 94.7 Y2-355L-6 250 455 94.9 Type Rated Output Full Load Locked-rotor current Locked-rotor torque Pull-out torque Kw Speed (r/min) Current (A) Eff (%) Power factor (cos) Rated current Ist/IN Rated torque Tst/TN Rated torque TM/TN Synchronous Speed 750r/min Y2-801-8 0.18 630 0.88 51 0.61 3.3 1.8 1.9 Y2-802-8 0.25 640 1.15 54 Y2-90S-8 0.37 660 1.49 62 4.0 Y2-90L-8 0.55 2.18 63 2.0 Y2-100L1-8 0.75 690 2.17 71 0.67 Y2-100L2-8 1.1 2.39 73 0.69 5.0 Y2-112M-8 1.5 680 4.50 75 Y2-132S-8 2.2 710 6.00 78 0.71 6.0 Y2-132M-8 3.0 7.90 79 0.73 Y2-160M1-8 4.0 720 10.3 81 1.9 Y2-160M2-8 5.5 13.6 83 0.74 2.0 Y2-160L-8 7.5 17.8 85.5 0.75 Y2-180L-8 11 730 25.1 87.5 0.76 6.6 Y2-200L-8 15 34.1 88 Y2-225S-8 18.5 40.6 90 1.9 Y2-225M-8 22 740 47.4 90.5 0.78 Y2-250M-8 30 64.0 91 0.79 Y2-280S-8 37 78.0 91.5 Y2-280M-8 45 94.0 92 Y2-315S-8 55 111 92.8 0.81 1.8 Y2-315M-8 75 151 93 Y2-315L1-8 90 178 93.8 0.82 Y2-315L2-8 110 217 94 7.2 Y2-355M1-8 132 261 93.7 Y2-355M2-8 160 315 94.2 Y2-355L-8 200 388 94.5 0.83 Synchronous Speed 600r/min Y2-315S-10 45 590 100 91.5 0.75 6.2 1.5 2.0 Y2-315M-10 55 121 92 Y2-315L1-10 75 162 92.5 0.76 Y2-315L2-10 90 191 93 0.77 Y2-315M1-10 110 230 93.2 0.78 6.0 1.3 Y2-315M2-10 132 275 93.5 Y2-355L-10 160 334 93.5

Property and Featurs: 　　Y series motor is a kind of low-voltage 3-phase cage induction motor. Which is a basic series for general uses. This series can meet requirements for general uses at home and abroad with frame range 80-315 and it's a new product with the mational unified design. 　　Y series has the advantages of high efficiency, energy saving, fine operation performance, small vibration, low noise, long service life, high reliablility, convenient

maintenance, big breakaway tor que, Fixing measurement and power grade completely conform to IEC standard. It enploys Grade B insulation, IP44 class for shell protection and IC411 cooling mode. 　　The rated voltage and frequency of Y series are respectively 380V and 50Hz. Y connection is adopted for motors below 3KW and "Δ" commection is adopted for those above 4KW. 　　 Y series motor is commonly applied in machinery and equipment without special requirements, such as agricultural machinery, food machinery, fan, agitator and air compressor, etc.

Technical Data of Y series:

Type	Power (KW)	Rated current IN (A)	Rated speed nN (rpm)	Efficiency η (%)	Power factor (cos)	Locked-rotor torque	Locked-rotor current	Pull-out torque	Pull-out torque
						Rated current Tst/TN	Rated current Lst/TN	Rated torque Tmin/TN	Rated torque Tmax/Tn
Synchronous Speed 3000r/min
Y80M1-2	0.75	1.8	2830	75.0	0.84	2.2	6.5	1.5	2.3
Y80M2-2	1.1	2.5		77.0	0.86		7.0
Y90S-2	1.5	3.4	2840	78.0	0.85
Y90L-2	2.2	4.7		80.5	0.86			1.4
Y100L-2	3	6.4	2870	82.0	0.87
Y112M-2	4	8.2	2890	85.5
Y132S1-2	5.5	11	2900		0.88	2.0		1.2
Y132S2-2	7.5	15		86.2
Y160M1-2	11	22	2930	87.2
Y160M2-2	15	29		88.2
Y160L-2	18.5	36		89.0	0.89			1.1	2.2
Y180M2	22	43	2940
Y200L1-2	30	57	2950	90.0
Y200L2-2	37	70		90.5
Y225M-2	45	84	2970	91.5				1.0
Y250M-2	55	103
Y280S-2	75	140		92.0				0.9
Y280M-2	90	167		92.5
Y315S-2	110	200	2980			1.8	6.8
Y315M-2	132	237		93.0
Y315L1-2	160	286		93.5
Y315L2-2	200	356						0.8

Type	Power (KW)	Rated current IN (A)	Rated speed nN (rpm)	Efficiency η (%)	Power factor (cos)	Locked-rotor torque	Locked-rotor current	Pull-out torque	Pull-out torque
						Rated current Tst/TN	Rated current Lst/TN	Rated torque Tmin/TN	Rated torque Tmax/Tn
Synchronous Speed 1500r/min
Y80M1-4	0.55	1.5	1390	73.0	0.76	2.4	6.0	1.7	2.3
Y80M2-4	0.75	2.0		74.5		2.3		1.6
Y90S-4	1.1	2.8	1400	78.0	0.78		6.5
Y90L-4	1.5	3.7		79.0	0.79
Y100L1-4	2.2	5.0	1430	81.0	0.82	2.2	7.0	1.5
Y100L2-4	3	6.8		82.5	0.81
Y112M-4	4	8.8	1400	84.5	0.82
Y132S-4	5.5	12		85.5	0.84			1.4
Y132M-4	7.5	15		87.0	0.85
Y160M-4	11	23	1460	88.0	0.84
Y160L-4	15	30		88.5	0.85
Y180M-4	18.5	36	1470	91.0	0.86	2.0		1.2	2.2
Y180L-4	22	43		91.5
Y200L-4	30	57		92.2	0.87
Y225S-4	37	70	1480	91.8		1.9
Y225M-4	45	84		92.3	0.88			1.1
Y250M-4	55	103		92.6		2
Y280S-4	75	140		92.7		1.9		1.0
Y280M-4	90	164		93.5	0.89
Y315S-4	110	201		93.5		1.8	6.8
Y315M-4	132	241	1490	94.0
Y315L1-4	160	291		94.5
Y315L2-4	200	354						0.9

Type	Power (KW)	Rated current IN (A)	Rated speed nN (rpm)	Efficiency η (%)	Power factor (cos)	Locked-rotor torque	Locked-rotor current	Pull-out torque	Pull-out torque
						Rated current Tst/TN	Rated current Lst/TN	Rated torque Tmin/TN	Rated torque Tmax/Tn
Synchronous Speed 1000r/min
Y80M-6	0.55	1.8	910	71.5	0.70	2.0	5.5	1.5	2.2
Y90S-6	0.75	2.3		72.5	0.70
Y90	1.1	3.2		73.5	0.72			1.3
Y100L-6	1.5	4.0	940	77.5	0.74		6.0
Y112M-6	2.2	5.6		80.5
Y132S-6	3	7.2	960	83.0	0.76		6.5
Y132M1-6	4	9.4		84.0	0.77
Y132M2-6	5.5	13		85.3	0.78
Y160M-6	7.5	17	970	86.0					2.0
Y160L-6	11	25		87.0				1.2
Y180L-6	15	31		89.5	0.81	1.8
Y200L1-6	18.5	38		89.8	0.83
Y200L2-6	22	45		90.2
Y225M-6	30	60	980		0.85	1.7
Y250M-6	37	72		90.8	0.86	1.8
Y280S-6	45	85		92.0	0.87			1.1
Y280M-6	55	104
Y315S-6	75	141	990	92.8		1.6		1.0
Y315M-6	90	168		93.2
Y315L1-6	110	204		93.5
Y315L2-6	132	245		93.8

Type	Power (KW)	Rated current IN (A)	Rated speed nN (rpm)	Efficiency η (%)	Power factor (cos)	Locked-rotor torque	Locked-rotor current	Pull-out torque	Pull-out torque
						Rated current Tst/TN	Rated current Lst/TN	Rated torque Tmin/TN	Rated torque Tmax/Tn
Synchronous Speed 750r/min
Y132S-8	2.2	5.6	710	80.5	0.71	2.0	5.5	1.2	2.0
Y132M-8	3	7.3		82.0	0.72
Y160M1-8	4	9.5	715	84.0	0.73		6.0
Y160M2-8	5.5	12.7		85.0	0.74
Y160L-8	7.5	17.0		86.0	0.75		5.5
Y180L-8	11	24.4	730	87.5	0.77	1.7	6.0	1.1
Y200L-8	15	32.9		88.0	0.76	1.8
Y225S-8	18.5	39.7	735	89.0		1.7
Y225M-8	22	46.4		90.0	0.78	1.8
Y250M-8	30	61.6		90.5	0.80
Y280S-8	37	76.1	740	91.0	0.79
Y280M-8	45	90.8		91.7	0.80			1.0
Y315S-8	55	111		92.0		1.6	6.5
Y315M-8	75	150		92.5	0.81			0.9
Y315L1-8	90	179		93.0	0.82
Y315L2-8	110	219		93.3			6.3

Type	Power (KW)	Rated current IN (A)	Rated speed nN (rpm)	Efficiency η (%)	Power factor (cos)	Locked-rotor torque	Locked-rotor current	Pull-out torque	Pull-out torque
						Rated current Tst/TN	Rated current Lst/TN	Rated torque Tmin/TN	Rated torque Tmax/Tn
Synchronous Speed 600r/min
Y315S-10	45	100	590	91.5	0.75	1.5	6.2	/	2.0
Y315M-10	55	121		92	0.75
Y315L1-10	75	162		92.5	0.76

YC series single-phase capacitor-start asynchronous motors
Single-phase capactitor-start asynchronous motor. Series YC, is totally enclosed fan-cooled type. The starting torque of motors is 2-3 times as rated torque. The motors give excellent performance such as low in noise, low in temperature-rise, high in overloading capacity and convenience in maintenance. It may widely application in all types of small machine tools compression pumps refrigerators and the equipment which need bigger
starting torque, etc.
They are wonderful utilities for family workshop where only single-phase power are available.
This series motors adopts class B insulation, IP44 degree of protection and IC0141 method of cooling. The rated frequency of the motor is 50Hz while the rating voltage is 220V.
The mounting dimensions of the motors are all in conformity with IEC standarde. Mounting
types:IM B3,IM B5,IM B35,IM B14,IM B34,IM V1,IM V3,IM V5,IM V6,IM V18,IM V19,IM V36.
Working conditions: Altitude above sea level not over 1000m, Altitude temperature not over 40℃.

TECHNICAL DATA OF YC SERIES
Franme reference and size	rated power	Full load sreed in revolutions per minute	Full load current at rated voltage	Exiciter Voltage	Efficiency	Power factor	Direct on line staring torque ratio	Direct on line pull out torque ratio	Locked rotor torgue	Mean sound pressure level@1m on no load	Weight
Type	Output (KW)	Speed (r/min)	Amps (A)	Voltage (V)	EFF. (%)	P.F. Cosf	LRT/RLT	BDT/RLT	LRA	Noise LwdB(A)	Weight (Kg)
YC711-2	0.18	2800	1.9	220	60	0.72	3.0	1.8	12	70	9.5
YC712-2	0.25	2800	2.4	220	64	0.74	3.0	1.8	15	70	10
YC711-4	0.12	1400	1.9	220	50	0.58	3.0	1.8	9	65	9.5
YC712-4	0.18	1400	2.5	220	53	0.62	2.8	1.8	12	65	10
YC801-2	0.37	2800	3.4	220	65	0.77	2.8	1.8	21	75	13.5
YC802-2	0.55	2800	4.7	220	68	0.79	2.8	1.8	29	75	14.5
YC801-4	0.25	1400	3.1	220	58	0.63	2.8	1.8	15	65	13.5
YC802-4	0.37	1400	4.2	220	62	0.64	2.5	1.8	21	70	14.5
YC90S-2	0.75	2800	6.1	220	70	0.80	2.5	1.8	37	75	22
YC90L-2	1.1	2800	8.7	220	72	0.80	2.5	1.8	60	78	2
YC90S-4	0.55	1400	5.5	220	66	0.69	2.5	1.8	29	70	22
YC90L-4	0.75	1400	6.9	220	68	0.73	2.5	1.8	37	70	21
YC100L1-2	1.5	2800	11.4	220	74	0.81	2.5	1.8	80	83	31
YC100L2-2	2.2	2800	16.5	22	75	0.81	22	1.8	120	83	22
YC100L1-4	1.1	1400	9.5	220	71	0.74	2.5	1.8	60	73	31
YC100L2-4	1.5	1400	12.5	220	73	0.75	2.5	1.8	80	78	32
YC112M-2	3	2800	21.9	220	76	0.82	2.2	1.8	150	87	46
YC112M-4	2.2	1400	17.8	220	74	0.76	2.2	1.8	120	78	40
YC132S-2	3.7	2800	26.6	220	77	0.82	2.2	1.8	175	87	64
YC132S-4	3	1400	23.6	220	75	0.77	2.2	1.8	150	82	64
YC132M-4	3.7	1400	28.0	220	76	0.79	2.2	1.8	175	82	70

General introduction：

YL series two-value capacitor asynchronous motors YL series capacitor asynchronous motors are single-phase the motors of capacitor start and run. Main features: mall size high capacity, strong starting torque, high power factor and efficiency, safety and reliability in running, simple construction and easy maintenance, it possess frame No. and capacity as three-phase asynchronous motors. The rated frequency of the motors in 50Hz while the rated voltage is 220V. This series motors are of totally enclosed fan-cooted structure, class B insulation, IP44 degree of protection and IC411 method of cooling. The mounting dimensions of the motors are all in conformity with IEC standards. Mounting types: IM B3、IM B5、IM B35、IM B14、IM V1、 IM V3、IM V5、IM V6、IM V18、IM V19、IM V36。 YL series motors are suitable for machines and equipments such as full load start.

TECHNICAL DATA OF YL SERIES
Franme reference and size	rated power	Full load sreed in revolutions per minute	Full load current at rated voltage	Exiciter Voltage	Efficiency	Power factor	Direct on line staring torque ratio	Direct on line pull out torque ratio	Locked rotor torgue	Mean sound pressure level@1m on no load	Weight
?? Type	?? Output (KW)	?? Speed (r/min)	?? Amps (A)	?? Voltage (V)	?? EFF. (%)	???? P.F. Cosf	??? ??? LRT/RLT	??? ??? BDT/RLT	???? LRA	?? Noise LwdB(A)	?? Weight (Kg)
YL711-2	0.37	2800	2.7	220	67	0.92	1.8	1.6	5.5	72	10
YL712-2	0.55	2800	3.9	220	70	0.92	1.8	1.6	5.5	72	11
YL711-4	0.25	1400	2.0	220	62	0.92	1.7	1.6	5.O	67	9
YL712-4	0.37	1400	2.8	220	65	0.92	1.7	1.6	5.0	67	10
YL801-2	0.75	2800	4.9	220	73	0.9S	1.7	1.6	5.5	75	14
YL802-2	1.1	2800	7.0	220	75	0.95	1.7	1.6	5.5	75	15
YL801-4	0.55	1400	3.95	220	69	0.92	1.7	1.6	5.0	70	13
YL802-4	0.75	1400	5.05	220	71	0.95	1.7	1.6	5.0	70	14
YL90S-2	1.5	2800	9.4	220	76	0.95	1.7	1.6	5.5	78	22
YL90L-2	2.2	2800	13.7	220	77	0.95	1.7	1.6	5.5	78	24
YL90S-4	1.1	1400	7.3	220	72	0.95	1.7	1.6	5.O	73	21
YL90L-4	1.5	1400	9.7	220	74	0.95	1.7	1.6	5.O	73	23
YL100L-2	3	2222	18.2	222	79	0.95	1.7	1.6	6.0	83	24
YL100L1-4	2.2	1400	13.9	220	76	0.95	1.7	1.6	5.O	78	32
YL100L2-4	3	1400	18.4	220	78	0.95	1.7	1.6	5.O	78	33
YL112M-2	3.7	2800	22.1	220	80	0.95	1.7	1.6	6.0	83	46
YL112M-4	3.7	1400	2 2	222	79	0.95	1.7	1.6	5.5	83	44
YL132-2	5.5	2800	32.5	220	81	0.95	1.7	1.6	6.0	88	66
YL132-4	5.5	1400	32.9	220	80	0.95	1.7	1.6	5.5	83	70